manualshive.com logo in svg

CareFusion Pyxis MedStation 4000, Руководство пользователя, Страница: 16 / 246

Поделиться
Скачать
CareFusion Pyxis MedStation 4000 Скачать руководство пользователя страница 16

Chapter 1

—

System overview

6

Pyxis MedStation 4000 System Console User Guide

L

IMITED

 R

ELEASE

 1

 DRAFT 5/4/11

Network information

Pyxis Procar translates patient information from the hospital’s host information 
system into a usable format for the Pyxis MedStation system. It serves as a 
connection between the console and the hospital’s ADT, billing, and clinical 
(patient-profile) pharmacy systems.

The communications link between the console and the stations is interactive. The 
console receives patient information from the hospital’s information system 
(ADT), correlates it with the correct nursing unit and area, and sends it to the 
appropriate stations.

The console communicates with each station after a specified time interval 
depending on setup and the amount of activity. Information is automatically 
retrieved and subsequently stored when any change in status, such as medication 
removal, occurs. The activities are then forwarded to the hospital’s billing system 
through Pyxis Procar.

Comprehensive reporting

Many facilities have numerous stations located throughout a variety of patient-
care areas, so comprehensive and accurate reporting is critical to the pharmacist 
and system manager.

The console, located in the pharmacy, retains up to 31 days of transaction data for 
all stations, including:

•

Medication removals and returns

•

Wasted medications

•

Refill activities

•

Discrepancy-resolution information

•

Inventory verification

Reports on every aspect of the Pyxis MedStation system—including pocket 
accesses, inventory, patient ADT, orders (profile mode only), and formulary—are 
available from the console, located in the pharmacy. Data can be sorted and 
printed in a variety of reports and kept as a permanent record of medication usage.

NOTE

Some hospital or pharmacy vendors require additional hardware and software to 
accomplish this interface. Your CareFusion representative works with you to 
determine the requirements for your facility.

NOTE

CareFusion provides long-term data-archive and reporting systems to track 
inventory and clinical data. For more information, contact your CareFusion 
representative.

Содержание Pyxis MedStation 4000























































































































































































































































Отзывы:

Нет отзывов