CareFusion Pyxis MedStation 4000 Скачать руководство пользователя страница 102

Страница: 102 / 246

Chapter 3

—

Setting Up the System

Pyxis MedStation 4000 System Console User Guide

7. Click

Reconcile Billing

to populate the patient name, ID, room, and bed fields

associated with the patient information.

Click

Close

in the dialog box if you do not want to populate the Reconcile

Patients dialog box with the patient information.

Once both sets of fields are populated, the

Add To List

button is enabled.

8. Click the button to add a change record with permanent and temporary patient

data in a list box without affecting the system data yet.

A temporary patient may only be associated with one permanent patient. A
permanent patient may be associated with multiple temporary patients.

9. Select a record in the Patient Reconcile List box to enable the

Remove From

List

button. Click the button to remove the change record from the list box.

10. When the list box contains entries, the

Reconcile Billing

button is enabled.

When the button is clicked, a dialog box appears asking if you want to
continue reconciling.

11. Click

Cancel

to close the dialog without affecting system data. If data is in the

list box, a dialog box appears asking if you want to cancel.

Temporary patients that have already been reconciled to a permanent patient
may not be reconciled again. You cannot add patients already reconciled to
the list box.

The console provides a means of producing a report that contains records of the
patients. See

Reconciled Patients

on page

174

. It reconciles permanent patients to

temporary patients. This includes:

•

The name and ID of the user who created the association.

•

The time the patient records were reconciled.

Содержание Pyxis MedStation 4000























































































































































































































































Результаты поиска

Содержание Pyxis MedStation 4000

Отзывы:

CareFusion Pyxis MedStation 4000, Руководство пользователя, Страница: 102 / 246

Результаты поиска

Содержание Pyxis MedStation 4000

Отзывы: