CareFusion Pyxis MedStation 4000 Скачать руководство пользователя страница 127 | Manualshive

Страница: 127 / 246

CareFusion Pyxis MedStation 4000 Скачать руководство пользователя страница 127

Site-specific options

Pyxis MedStation 4000 System Console User Guide

117

removal times to that of the previous removal, rather than to the due time of the
medication.

Too Early and Too Late dialog box warnings display at profile stations. Although
you might have administered the medication, the warning is more specific to the
formulary order. With this warning functionality, a dose time list appears after you
select the medication. This list defaults to the most current dose time, but also
shows other available dose times that have already been removed, are past due, or
are scheduled.

In an environment where more than one Nurse is caring for the same patient, it is
recommended to use medication warnings (too close) as a potential aid in the
prevention of duplicate doses being removed from the MedStation.

These settings can be overridden by settings on the Formulary tab for individual
medications.

To view or modify warnings

1. Select

System Setup > Site Specific Options

.

2. In the Site Information dialog box, click the

Warnings

tab.

3. In the

Default Remove/Admin. +/- Times

section, enter the facility-wide value

for the type of warnings that you want to set system-wide.

4. In the Dosage Warnings section, clear the

Show ‘Please re-check Your Entry’

warning for variable dose med

check box if you do not want the station to warn

users when they remove a variable dose that exceeds the strength allowed by
the order.

5. Click

Save

.

6. When the confirmation message appears, click

OK

to return to the standby

dialog box.

«
...
125
126
127
128
129
...
»

Содержание Pyxis MedStation 4000























































































































































































































































Отзывы:

Нет отзывов