Car-O-Liner BenchRack 4200, Инструкция по эксплуатации

Страница: 43 / 55

BenchRack Car-O-Liner Group AB
32163, EN - rev. 5, 2018-04
43
5.2 Inspection and service plan
IMPORTANT!
Do not use abrasives to remove rust from the milled bench
tracks. Use rotating steel brush or similar tool. Risk of material damage.
Follow the Inspection plan below for correct inspection
intervals and service actions:
Daily inspection Weekly inspection Monthly inspection
The safety latch shall drop easily into its slot.

Check that crush guard does not jam.

Check that drive-off stops are tightened and not
damaged.

Check that the tilting mechanism moves freely
and folding legs do not jam.

Clean and lubricate safety latch moving parts.

Check that hydraulic hose and air hoses are positioned
properly and are in good condition.

Check that joint axles and locking screws are tightened.
Tighten if necessary. 
Check for oil leakage at cylinders and power unit.
Contact Sevice & Support

Check the level in the hydraulic oil tank. Top up as
necessary. Change oil and filter at least once a year.

Check the warning signs . Replace if damaged
or missing.

Check the anchoring to the floor for cracks in the
concrete and the tightness of the anchoring bolts
(read safety instructions about working under the lift
in section 2.3 Sefety signs).

Check all functions of the pendant station.
Correct if necessary.

Check milled bench tracks for corrosion.
Remove if necessary (see Important notice above).

Clean and grease all nuts and bolts
