BenchRack Car-O-Liner
Group
AB
32163, EN - rev. 5,
2018-04
23
3.4
Transport and inspection of delivery
The bench and the bottom frame are held together by transport hooks to en-
sure safe transport.
These hooks must be used whenever the bench and frame are moved. Weight
is 1200 kg.
If a fork lift truck is used to move the unit, it must have a fork width of at
least 850 mm. The lift must be centred on the long side of the unit.
IMPORTANT!
Exercise care when transporting BenchRack.
3.4.1 Transport
protection
On delivery the equipment must be checked with regard to transport damage.
If any part is damaged, the lift may not be used until the damage has been
repaired.
Contact your supplier.
All models of BenchRack are equipped with transport protection that holds
the base frame against the bottom of the bench.
IMPORTANT!
Remove transport protection before the lift is put in use;
otherwise damage can occur.
3.4.2 Storing
in
workshop/Transport outside workshop
Due to bare metal in combination with humid conditions easily causes corro-
sion to the milled surfaces. Rust protection of milled bench tracks
(see illus-
tration)
must be carried out when the bench is stored and not in use or trans-
ported outside workshop. Apply Cortec VpCI-369 from Tribotec or equiva-
lent.
Содержание BenchRack 4200
