BenchRack Car-O-Liner
Group
AB
32163, EN - rev. 5,
2018-04
31
4.3
Tilting the bench
Raising:
1
The bench is in the tilted position.
2
Raise the lift until all legs hang free and straight down.
WARNING!
Ensure that all of the bench legs hang straight down. Risk of
injury.
3
Lower the lift so that the bench is supported by the four legs. Push
in the control lever to lock the bench in a horizontal position.
4
In this position the draw aligner may be connected.
5
Raise to desired height.
WARNING!
The control lever must be fully pushed in. Risk of injury.
In this position the draw aligner may be connected.
Tilting:
1
The bench must be in the draw aligner position.
Pull out the control lever to enable the tilt function.
Raise the lift until all legs hang free.
2
Turn the control lever anti clockwise so that the forward pair
of legs fold up and remain there, then lower the lift.
3
The bench is now in the lowest position and tilted.
Raising
Tilting
Locking the control lever
Bench seen from above:
Locked position
(horizontal bench)
Unlocked position
(tilted bench)
Control lever
Turning the control lever
2
Placing of
control lever
Unlocking
1
Содержание BenchRack 4200
