manualshive.com logo in svg

Car-O-Liner BenchRack 4200, Инструкция по эксплуатации

Поделиться
Скачать
Car-O-Liner BenchRack 4200 Скачать руководство пользователя страница 13

 
 

 
 

BenchRack Car-O-Liner 

Group 

AB 

32163, EN  - rev. 5,

 

2018-04 

13

 

 

2.3 Safety 

signs 

Undamaged safety signs shall always be affixed at the indicated places (

see 

section 2.3.1 "Placement of safety signs"

). If any signs are damaged or miss-

ing, the user is responsible for their immediate replacement. The following 
safety signs can be found on the equipment: 

PROHIBITED

 

For personnel to be on the lift while it is moving. 
 

WARNING

 

Maximum vehicle weight = 4200 kg. 
Minimum allowed distance between axles is 2500 mm. 
 

WARNING

 

During inspection and maintenance with the lift unit in the raised position, 
the lift unit must be blocked against unintentional lowering. 

 
WARNING

 

Danger of tripping due to loose hoses, etc. 
 

TILTING OPERATION DECAL 

 

 

 

 

SAFETY SIGNS 

The sign must be placed in the vicinity of the lift/bench and in such a way 
that it can be seen clearly by the operator.

 

 

 

!

Содержание BenchRack 4200
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды