Canon imagePROGRAF iPF9400, Руководство пользователя

Страница: 537 / 964

9
Close the Top Cover.
10
Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and the
barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.")
→P.544
ManageRemainRoll Barcodes Printer Operation After the Paper is Fed
Off Printed A menu for selection of the type of paper is shown on the Display Screen.
Press
▲ or ▼ to select the type of paper, and then press the OK button.
Not printed
On Printed The type and amount of paper left is automatically detected based on the barcode printed on the roll.
There is no need to specify the type and length of the paper.
Not printed A menu for selection of the type and length of paper is shown on the Display Screen.
Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button.
Important
•
Cut the edge of the roll using the Paper Cutting function if the edge is creased or soiled.
(See "Specifying the
Cutting Method for Rolls.")
→P.546
Note
•
For details on types of paper to select, see the Paper Reference Guide. (See "Types of Paper.")
→P.522
•
Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing quality.
(See
"Automatic Adjustment to Straighten Lines and Colors.")
→P.798
•
When paper leading edge detection is set to Off for Manual, printing will start at the position at which the roll was set
in procedure 8. Thus, the margin of the paper leading edge will enlarge. (See "Specifying the Cutting Method for
Rolls.")
→P.546
Changing the Type of Paper
Changing the Type of Paper
Follow these steps to change the type of paper specified on the printer after you have loaded paper.
If you will continue using this type of paper later, selecting
Keep Paper Type > On will save the time and effort of con-
figuring the media type setting when you load the paper again. The current media type settings before you select On
will be automatically selected at that time.
(See "Using the Same Type of Paper Regularly.")
→P.538
Important
•
For best printing results, the printer fine-tunes the print head height and the feed amount for each type of paper. Be sure to
select the type of paper to use correctly before printing.
•
Because the printer fine-tunes the feed amount for each type of paper, the margins and the size of printed images may vary
depending on the type of paper used. If margins and the size of images are not as you expected, adjust the paper feed
amount.
(See "Adjusting the Feed Amount.")
→P.805
•
Rolls and sheets have different printing areas, and sheets having a larger bottom margin than rolls.
(See "Print Area.")
→P.935
iPF9400 Changing the Type of Paper
User's Guide
Handling and Use of Paper
Handling rolls
537