Analogue Telephony Adaptor User Manual
10
Troubleshooting
48
10
Troubleshooting
This chapter provides information to help you to diagnose any problems
you may be having with your Flexor 151 device.
Resetting to factory defaults
It is possible to restore your Flexor 151 back to its factory default state.
This action can potentially erase all your settings and address
book entries, so must be careful and ensure that you keep all
the settings that you want to save when asked to do so.
To reset your Flexor 151 to its factory default state, follow the procedure
below:
Select the Flexor 151 option from the main management web page.
Select Reset Settings in the top of the window.
The following window is displayed:
To reset the device to its factory default state, click on Reset and
Restart.
If you would like to keep some of the settings you have configured for
the device, click on the check box alongside the setting that you want
to preserve and then click on Reset and Restart.
The web browser window is closed and the device is reset.
If you can't access the web pages, it is also possible to reset
the device by powering up the device with the call divert
button held down. Hold down this button until the Answer
Phone and E-Mail LEDs flash alternately on the device.
Release the call divert button. When the LEDs stop flashing
alternately the device has then been reset to factory defaults.
Note
Warning
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
