Analogue Telephony Adaptor User Manual
5 Making and receiving phone calls
21
5
Making and receiving phone calls
This chapter describes how to use the Flexor 151 to make and receive
phone calls:
Receiving calls on page 21
Making outgoing calls (using your phone) on page 22.
Making outgoing calls (using CTI via an attached PC) on page 23.
Failsafe mode on page 24.
Receiving calls
This section describes how the Flexor 151 receives different types of
phone calls.
Receiving phone calls on the Flexor 151 is extremely straightforward, but
there are some features to note:
The Line and VoIP indicators will flash to indicate which line the incoming
call is received on.
If your telephone is Caller ID capable, the number (and possibly the name)
of the caller will be displayed on your telephone.
For incoming VoIP calls if the number of the incoming caller is in your
address book, the Flexor 151 will automatically convert the number to the
name in your address book.
If the Flexor 151 Call Divert button has been pressed then the incoming
call will be redirected immediately and the telephone will not ring. (See
Buttons and LED indicators on page 11 for further details).
If Call Divert or Voicemail has been setup from the management web
pages (but the Call Divert button has not been pressed), then the call will
be redirected. The redirection will occur after a user-specified number of
rings. (See
Call management on page 39 for further details.)
If a call is received in the middle of another call, a periodic call waiting
beep will be played in the existing call. You can switch between the two
calls by pressing the
Hook button or the Recall button on your telephone.
See
Recall / Hook-flash functionality on page 26 for more information on
this and other advanced call functions.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
