Analogue Telephony Adaptor User Manual
4
Configuring the device
17
Configuring the Flexor 151
This section describes how to configure the Flexor 151 using the Flexor
151 management web pages. Follow
Step 1a
if using VoiceConnect, else
follow
Step 1b
.
Step 1a. Accessing the web pages using VoiceConnect
Assuming VoiceConnect is installed and running, once the Flexor 151 and
PC are on the same network and powered-up, the following dialog box will
be displayed after a short time (up to 30 seconds):
Click on Configure Now.
Step 1b. Accessing the web pages without using VoiceConnect
If you have not installed the Voice Connect application, lift the phone
receiver and press the ‘#’ button twice. The Flexor 151 will play an audio
message describing the URL that you need to enter in a browser window
to access the Flexor 151 management web pages. Enter this URL in a
browser window. The Flexor 151 management web pages will be
displayed.
If you have problems with either steps 1a or 1b, or when
picking up an attached telephone handset you hear a
diagnostic message – please see Troubleshooting on page
47.
Step 2. Configuration Pages
Having followed step 1a or step 1b you should now see a web page
displaying the Flexor 151 management web pages:
Note
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
