Analogue Telephony Adaptor User Manual
7
Managing the device
40
cannot do VoIP. The solution is to phone up the Flexor 151 from your
mobile, and then get the Flexor 151 to connect you to the international
number over VoIP. You are billed on your mobile phone for a call to your
Flexor 151, and billed for the international call on your VoIP account. But
the combined cost should be much cheaper than making a single
international call on your mobile; especially if the VoIP call is to another
VoIP user and completely free. This example uses a mobile phone, but the
hop on/off feature is useful from many different types of phone.
To enable Hop On/Off for all incoming land-line calls, edit the Call
Management web page as described below:
Select the Enable radio button in the Unanswered call actions
section.
Enter a value in the Number of rings before action field. This value
specifies the number of rings after which you wish calls to be
answered automatically.
Select the Hop on/off radio button in the Please select action
section.
Enter a valid pin number in the Pin field. The number can be up to 6
digits in length. Ideally, you should enter a number of at least 4 digits
Click on Save Settings.
The home page is displayed.
Now, if a call is received from a land line (not VoIP) the Flexor 151 will
answer the call automatically after the specified number of rings. A voice
prompt will ask you to enter your Pin number, (specified by you on the
management web page, preventing unauthorized access). After entering
the Pin number successfully, you will be presented with a VoIP dial-tone.
Now you can dial the number you really want and make a call over VoIP
from your mobile phone.
Setting up Call divert
To enable call diversion for all incoming land-line calls, edit the Call
Management web page as described below:
Enter the phone number to which calls should be diverted to, in the
Call Divert Number field.
Select the Enable radio button in the Unanswered call actions
section.
Enter a value in the Number of rings before action field. This value
specifies the number of rings after which you wish calls to be diverted.
Select the Divert to Call Divert number radio button in the Please
select action section.
Click on Save Settings.
The home page is displayed.
Now if a call is received, after waiting the specified number of rings, the
Flexor 151 will divert the call to the specified number. Note that your VoIP
account will be billed for the diverted part of the call.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
