Analogue Telephony Adaptor User Manual
3
Getting to know the device
12
Button /
LED
Call divert button and LED indicator. Pressing
this button will direct all incoming calls (both
land line and VoIP) to a specified number of
your choice. An example of when this can be
useful is on occasions when you are away but
expecting an important call and want it
directed to your mobile phone. Pressing the
call divert button will direct calls to the
specified number immediately; the phone will
not ring. See
Setting up
Call divert
on page 40
for more information on Call Diverting.
Line
LED
This indicator is used to indicate when a call is
being made over PSTN (land line) and not VoIP.
For incoming calls this LED may not be of
significance but for outgoing calls it is useful to
know how the call is being made, and
therefore how expensive it is.
VoIP
LED
This indicator is used to indicate when a call is
being made over VoIP. Again, for incoming
calls this may not be of significance but for
outgoing calls it is useful to know how the call
is being made, and therefore how expensive it
is.
If the VoIP indicator flashes rapidly when the
unit is idle, then there is a problem with VoIP,
and the unit will likely be in failsafe mode.
See
Failsafe mode on page 24
for further
information.
LED
This E-Mail LED is reserved for future use.
Figure 3-2 - Flexor 151 Front Panel LED
The front panel also includes a single LED which indicate the status of the
power connection to the device
:
LED state
Description
Solid red
The device is receiving power.
Unlit
The device is not receiving power.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
