Analogue Telephony Adaptor User Manual
8
Advanced configuration options
45
Changes can be saved by clicking Save Settings.
RTP and SIP DSCP
To change the DSCP used for SIP and RTP:
Enter the new DSCP into the RTP and SIP fields.
Changes can be saved by clicking Save Settings.
Network Settings
The Flexor 151 network settings menu can be accessed by clicking the
Network Settings link from the Flexor 151 home page. There are 4
modes supported by the Flexor 151:
Automatic. The Flexor 151 will automatically determine the best
network settings for your network.
DHCP. The Flexor 151 will only use DHCP. This can be used if
automatic network setting detection has failed and your network is
using DHCP.
Emulate PC Settings. The Flexor 151 will automatically emulate the
settings of a single PC attached to the LAN port, with the WAN port
connected to a broadband connection. This configuration mode is
used to enable the Flexor 151 to work directly with a Cable Modem or
for use in situation where the PC has to login to the network via a web
browser, for example, a campus network or a hotel internet service.
Manual. The Flexor 151 enables you to enter all the required IP
settings manually.
The network settings can also be controlled using IVR. See section
IVR
Network Configuration on page 47 for more information.
The network settings menu is shown below and includes information on
the current network settings:
In order to select Automatic, DHCP or Emulate PC Settings:
Select the appropriate radio button option.
Changes can be saved by clicking Save Settings.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
