Analogue Telephony Adaptor User Manual
5 Making and receiving phone calls
24
Highlight the phone number on the screen, and copy it to the
clipboard (usually by pressing Ctrl-C, or right-clicking and choosing
Copy from the menu displayed).
Right-click on the Voice Connect application icon in the bottom right
of your Desktop.
Choose the option Dial <number> from the menu displayed. (Where
number is the number you have copied.) Your phone will give a brief
confirmation ring.
Lift the phone receiver and the number will be dialled automatically.
Using Dial-by-Name
This feature is closely tied to the Address book mentioned above It enables
you to dial a number from your Address book by spelling out the name of
the person in the Flexor 151 Address book.
It works in a similar way to predictive text when sending text messages on
a mobile phone. You spell out the name to dial until you have spelt out
enough characters that a unique match can be made from your address
book.
To use the Dial-by-name option, follow the procedure below:
Dial # after lifting the receiver. A voice prompt will ask you to spell
out the name to dial on your phone number pad. Keep spelling out
characters until a match has been made.
Once a match has been made, stop spelling out characters. At this
point, if the address book only has one number for the name, the
number will be dialed.
However, if several alternative numbers are available for Work, Home
or Mobile, you will be prompted to press W (9), H (4) or M (6)
respectively to choose which number to dial.
Failsafe mode
In some situations it is not possible to make VoIP calls, for example, if your
Internet connection goes down, or if there is a power cut. In such
situations your Flexor 151 will enter a
Failsafe mode. The purpose of this
mode is to enable your telephone to make phone calls, albeit over your
land line rather than VoIP, even in the event of problems.
If ever Failsafe mode is entered you will hear a recorded diagnostic
message describing the problem (except in the power failure case). This
should help you to resolve the problem.
As soon as the problem is corrected the device will automatically leave
Failsafe mode. When you take the phone off-hook you will hear a dial-tone
instead of the diagnostic message.
See
Diagnostic messages on page 51 for more information on these
diagnostic messages.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
