
Analogue Telephony Adaptor User Manual
5 Making and receiving phone calls
22
Making outgoing calls (using your phone)
This section describes how to use the Flexor 151 to make outgoing calls
using your phone.
Making a VoIP call
By default, all calls will be made using VoIP; however this setting can be
overridden by pressing the telephone hook button or the Recall button.
(See
Making a PSTN call on page 22 for more information).
When making a VoIP call the following points should be noted:
To dial a land-line number, dial the number as normal, but always
remember to prefix it with the area code (even if the number is a local
number).
To dial another VoIP user using a telephone number, lift the telephone
receiver and dial their number.
To dial a VoIP user using a SIP URI, you must use the address book feature
of the Flexor 151 as a URI
cannot be entered using your phone’s numeric
keypad. For more information, refer
to Making outgoing calls (using CTI
via an attached PC) on page 23.
By default the Flexor 151 will give you 4 seconds to complete dialing a
number after the last digit has been pressed. However, if you dial the
number quickly and want to be connected immediately you can dial ‘#’ at
the end of the number to tell the Flexor 151 that no more digits will follow
(and not to wait 4 seconds).
Your Voice Over IP operator may have configured your unit
to dial immediately as soon as a valid phone number has
been entered.
Making a PSTN call
By default, outgoing calls are made over VoIP. But in some situations you
may prefer for the call to be made over your land-line.
Your Voice Over IP operator may have configured certain
phone numbers to be dialed automatically over your land
line without you needing to follow the instructions below.
To force a call to go out over your land line instead of VoIP, do the
following:
Lift your telephone receiver.
The dial-tone you hear will be your VoIP dial-tone.
Press the Recall button on your telephone to indicate you wish to
make a land-line call. (The button is often labeled Recall or
sometimes just R.)
See
Recall / Hook-flash functionality on page 26 for more information on
how to use the Recall button.
Note
Note
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030