33
5. Port Label
This shows which Port number the VCT is sending commands (default is 3520). The Vertex
hardware communication port number can be changed on the Main tab. Unless your application
uses a different port number, there is no reason to change it from the default.
Specifications
Physical
Actual Unit Size -
6.0”W x 7.1”L x 1.4”H
Actual Unit Weight -
0.81 lbs.
Size of Entire Product Box -
12” x 10” x 6”
Weight of Entire Product w/ Peripherals
- 2.2 lbs
Shipping Weight
- 3 lbs
Dimensional Shipping Weight
- 7 lbs
Electrical
Supply Voltage
- 9V DC, 2.1mm Center Negative Connection
Current Draw
- ~500mA
Management Ethernet Port
Speed
- 10/100 mbs Half and Full Duplex
Polarity
- MDI/MDI-X auto crossover
Pass-through VoIP Bridge Ethernet Ports
Connection
-
Parallel tap, no retransmission of packets (packet sniffing only)
Pass-through Speed
- 10/100 mbs, (will not pass 1000 mbs)