32
VCT Window Form - Labels / Buttons
1. Call Processing label
When Call Processing is on, the Vertex processes VoIP call data and outputs in the format
specified. Call Processing is turned off by the VCT when performing Network Packet Captures as
done using the
Advanced Tab
and the "Get SIP Gateway MAC" button. When a Packet Capture is
complete, the VCT automatically turns Call Processing back on.
2. Lock Label / Button
The "L" designates that password protected options are locked. Once the password,
callerid
is
entered in any password protected option, the VCT is unlocked denoted by "U".
Tip: A right-mouse-click on the "L" will unlock password protected options.
3 & 4. Location: & Last Command Label / Button
Location shows the method of UDP communication with the Vertex. The default is a Broadcast
connection (255.255.255.255). If you connect using the Location Manager, your defined location
name and Vertex IP address is show. If the Location label is Green, the last communication
between the VCT and the Vertex Hardware was successful. If Red, the most recent Command
sent by the VCT was not returned by the Vertex.
Tip: A mouse-click on the "Location" label / button will send a simple connection command. If the
last command was not returned and the label is Red, this may re-establish a connection .
