Calix ODC-120, Руководство по установке

Страница: 22 / 44

16
Calix ODC-120 Installation Guide
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2005 Calix. All Rights Reserved.
4.5.6 The splicing end chamber front access cover should already be removed. If not, remove it
(Fig. 13).
4.5.7 Remove each nozzle from its split cable sleeve by loosening the upper hose clamps (Fig. 15).
Slip the clamps down the nozzle and remove them. Set the nozzles and hose clamps safely
aside for later reattachment.
4.5.8 Separate the front half of the front split cable sleeve plate by removing the hex head bolts. Pull
the base plate toward you to remove it (Fig. 13).
4.5.9 Separate the front half of the rear split cable sleeves by removing the two hex head bolts securing
the center base plate (Fig. 14). The rear half of the rear split cable sleeve should not be
disturbed as it was installed and sealed at the factory.
4.5.10 Dress the cables toward the near end of the pad in preparation for placing the cabinet.
END CHAMBER
BASE ACCESS COVER
CHAMBER
BASE ACCESS COVER
MOUNTING BOLT
LOCATIONS
Fig. 13 : End Chamber Base Access Cover
Fig. 14 : Remove Splice Chamber Base Plate
Remove two hex head
bolts securing the center
base plate