Delete
Step
Delete the step and set the step number to delete the
step.
Delete
all
Delete all steps.
Copy
File 1 to
2
Copy List file 1 to file 2.
During List editing, the instrument would automatically return to the main in-
terface if there is no operation for a long period.
Operation Steps:
1. Press
[Shift]+[I-set]
(Function) composite key, and enter the Function menu
page.
2. Rotate the knob, select “List”, and press
[Enter]
key for confirmation. Enter
the List function setting page.
3. Rotate the knob to select running List file (Run), recalling List file (Recall)
and editing List file (Edit) in successive.
Run
Recall
Edit
4. Select different functions for setting. For detailed information about List file
editing, recalling and running, please refer to the specific introduction below.
The running, recalling and editing of List function are mutual prerequi-
sites. When the system has no existed List file, it is necessary to edit List
file, recall List file, and finally run the recalled List file.
Edit List files
1. In the List function setting interface, select
Edit
, and enter the List file editing
menu.
2. At first, select the number of file to be edited. A maximum of 10 List files can
be edited in this instrument.
Edit List = 1/10
3. Press
[Enter]
key for confirmation. Enter the List editing page.
1: List Setup
2: Edit Step= 1/1
3: Insert Step= 1/1
4: Add Step= 1/1
5: Delete Step= 1/1
Copyright © Itech Electronic Co., Ltd.
51
