•
On Delay is from the time that a command to turn on the output is received
until the output actually turns on.
•
Off Delay is from the time that a command to turn off the output is received
until the output actually turns off.
The procedures to set the output delay time are as follows.
1. Press
[Shift]+[V-set]
(Config) to enter into the configuration menu interface.
2. Rotate the knob to select
On Delay
or
Off Delay
and
[Enter]
.
3. Use right and left keys or knob to set the delay time and press
[Enter]
to
confirm.
4. Press
[Esc]
to exit.
Copyright © Itech Electronic Co., Ltd.
48