BYD TANG EV 2021, Руководство пользователя

Страница: 50 / 218

49
RIDE
06
Lumbar support adjustment: press the
front or rear part of the switch to strengthen
or weaken the lumbar support; Press the
upper or lower part of the switch to raise or
lower the lumbar support.
REMINDER
•
The contour of the front seat backrest
can be changed. The support can be
adjusted according to the radian of
the lumbar spine, so that the driver
and the front passenger can sit
correctly and comfortably.
Leg support adjustment: pull the handle
of the telescopic leg support under the seat,
move the leg support forward/backward to
a proper position, and then release.
WARNING!
•
The seat must be adjusted correctly
to ensure that the brake pedal can
be fully pressed. On this premise, the
seat position should be as far back as
possible to ensure a comfortable ride
and make handling easier.
Seat Memory
Memory Button
SET "Set" button
1 "1" memory button
2 "2" memory button
Setting the Seat Memory
When the vehicle is powered on and in
"Park", set the seat memory function as
follows after adjusting the driver seat, left/
right side mirrors and the steering wheel to
your desired positions:
• After pressing the "SET" button, press
either "1" or "2" memory button within
the next 3 seconds. The buzzer will
then sound and show a prompt reading
"position set".
• Press the "SET" button and either "1" or
"2" memory button simultaneously. The
buzzer will sound and show a prompt
reading "position set".