Bull ESCALA E250, Использование и обслуживание, Страница: 62 / 162

4-2
Setup Guide
Logging into the System
Warning:
After you have started the system, it may take a few minutes for the login prompt
to appear on the display. This amount of time depends on your system configuration. Do not
press any keys while you are waiting, as this may cause unexpected results.
When the login prompt appears on the display:
1. Type your login name and press the Enter key or click on the OK button.
2. If a password is required (the related prompt appears), type your password and press
the Enter key or click on the OK button (the screen does not display your password as
you type it).
If the password prompt does not appear, you have no password defined and you can
begin working on the operating system.
If the system displays:
login incorrect
Log in again, and enter the correct login name and password. If you still have problems,
ask your system administrator.
Stopping the System
Warning: When using the shutdown procedure for your system, enter the correct command
before you stop the system. Failure to do so, may result in loss of data. Please refer to your
operating system documentation.
1. Exit any applications that are running. Consult the applications manuals for instructions.
2. Ensure that the media drives do not contain any media.
3. Exit the operating system using the appropriate
shutdown
command.
a. It is possible to execute the shutdown procedure from the system console (local or
remote line) with the base unit key set to the Secure position. Remember, before
rebooting the system, to set the base unit key mode switch to the Normal or the
Service position.
b. When the shutdown program is executed, a warning message is sent to all
connected terminals. You can specify the time period between the sending of the
warning message and the system shutdown.
Here is an example:
shutdown –h +5r
represents a period of 5 minutes.
Warning: This period should allow all the users sufficient time to finish their sessions
and save their data. The amount of time can vary from a few seconds (allowing the
user to exit the vi editor, for example) to several minutes (allowing the user to
properly finish the update of a database). In the case of a user updating a database,
if the system is shutdown before the user has properly finished his update session,
there can be loss of important data.
4. Set the base unit key mode switch to the Power Off position.
Note: If nobody needs to use the system, remove the key, to prevent unauthorized reset of
the system.