Bull ESCALA E250, Использование и обслуживание, Страница: 130 / 162

6-28
Setup Guide
8. Remove the SCSI adapter from the SCSI connector of the media drive.
Warning:
It is recommended to store the SCSI adapter for possible future re-installation.
9. Remove the media drive mounting kit performing the steps indicated below on each side
of the media drive:
– Insert a flat screwdriver between the contact spring and the plastic rail
– Press the screwdriver blade towards the outside.
Warning: It is recommended to store the media drive mounting kit for possible future
re-installation.
If you replace the media drive with a new one, record the SCSI-ID setting and skip to
Media
Drive Installation
,
step 5
, on page 6-19.
If you do not replace the media drive just removed with any other media drive, perform the
following steps:
a. Store the removed media drive in an antistatic envelope.
b. Install the appropriate metal blank on the chassis:
– Grip the metal blank by the edges and position it in the corresponding free slot
– Secure the metal blank to the chassis by tightening its retaining screws.