manualshive.com logo in svg

Bull ESCALA E250, Использование и обслуживание, Страница: 135 / 162

Поделиться
Скачать
Bull ESCALA E250 Скачать руководство пользователя страница 135

6-33

Expanding the System Configuration

Device Hot Swapping

If a hard disk drive is faulty, it can be removed and replaced without interrupting the system
activity, through the hot swapping feature implemented on the system.

The replacement operation is reserved to the system administrator (

root

 authority).

This feature is available, with different modalities, either if the system is working in RAID
configuration or in not-RAID (normal or native High Availability) configuration.

•

Hot Swapping under Basic (JBOD) Configuration

, below

•

Hot Swapping under RAID Configuration

, on page 6-34.

Hot Swapping under Basic (JBOD) Configuration

Warning: 

Before handling any device, be sure you know the rules described in 

Device

Configuration

, on page 5-7.

Perform the following steps to replace one faulty hard disk drive.

1. Identify the faulty hard disk drive and stop running activity on it, if any.

2. Perform the preliminary software operations to remove it logically from the device

configuration database through the 

SMIT

 program.

Note:

If you need more detailed information, consult the 

AIX 4.3 System Management

Guide: Operating System and Devices

, in the 

Logical Volumes

 and 

System

Management Interface Tool

 sections.

3. Open the device shutter by turning the device shutter key to the right.

4. Identify the faulty hard disk drive through the blue/green LED light off.

Note:

The LED light is blue if the disk is running in ULTRA-2/LVD mode, it is green if the
disk is running in ULTRA/SE mode.

5. Physically remove the hard disk drive according to the instructions described in 

Hard

Disk Drive Removal

 

step 5

, on page 6-30.

6. Replace the hard disk drive with a new one according to the instructions described in

Adding a Hard Disk Drive to a Disk Cage

 

step

 

7

, on page 6-24.

7. Configure the new hard disk drive through the 

SMIT

 program (System Management

,

Devices

, 

Add a Disk

)

 and restore the original device configuration.

8. Check the blue/green LED is on; this means that the swapping procedure is successfully

completed.

9. Close the device shutter by turning the device shutter key to the left and store it safely.

Содержание ESCALA E250



































































































































































Отзывы:

Нет отзывов