Bull ESCALA E250, Использование и обслуживание, Страница: 35 / 162

System Setup Procedure
2-5
Connecting Printers
If you need to connect a printer to the system:
1. Connect the printer to the proper connector on the rear of the base unit, as follows:
–
If you are going to use it as a parallel printer, connect it to the enhanced parallel
connector
– If you are going to use it as a serial printer, connect it to one of the serial connectors
(RS-232 ports).
System Rear Side
1 Serial ports
2
Parallel port
You can also connect printers to a SCSI port (if PCI controllers housing SCSI ports are
installed inside the system unit), and to the Ethernet network using either the native
connector or external ones.
2. Connect the printer power cord first to the printer itself and then to a power outlet.
For further information about your printer connection and configuration, please refer to the
documentation provided with the printer itself and to the
Terminals and Printers
Configuration Guide.
Connecting PCI Controller Cables
If you need to connect one or more PCI controller cables for external connections, please
refer to the specific documentation delivered with each controller.
If you need to connect SCSI cables, refer to the Maintenance Guide or to the Disk
Expansion Unit Service Guide , for disk expansion unit SCSI connections.