Bull ESCALA E250, Использование и обслуживание, Страница: 125 / 162

6-23
Expanding the System Configuration
Hard Disk Drive Installation
•
Adding a Hard Disk Drive to a Disk Cage
, below
•
Adding a Disk Cage
, on page 6-26.
Adding a Hard Disk Drive to a Disk Cage
Warning: Before handling any device, be sure you know the rules described in Device
Configuration , on page 5-7.
1. Perform a system power off and unplug the unit power cord from the wall outlet (for
details, if needed, see Preliminary Operations , on page 6-3).
2. Open the device shutter (for details, if needed, see Device Shutter Opening , on page
6-4).
3. Wear the antistatic wrist strap. It is recommended not to touch the components on the
device back panel (for details, if needed, see
How to Handle Hardware Components
,
on page 6-2).
4. Release the disk carrier from the disk cage by opening the latches on the front side.
Remove it from the disk cage. It is recommended to lay it on a flat surface.
5. Unscrew the mounting screws provided with each installed disk carrier.