manualshive.com logo in svg

Bull ESCALA E250, Использование и обслуживание, Страница: 120 / 162

Поделиться
Скачать
Bull ESCALA E250 Скачать руководство пользователя страница 120

6-18

Setup Guide

10.Position the slot cover in the free slot (A) and secure it by tightening clockwise its

retaining screw (B).

Warning: 

It is recommended to install a slot cover in any free controller card slot.

11. Re-install the left lateral panel (for details, if needed, see 

Lateral Panel Installation

, on

page 6-9).

12.Perform a system power on (for details, if needed, see 

Restart Operations

, on page

6-9).

SCSI Controller for Internal Devices

The installation of an additional SCSI controller to manage internal devices requires some
additional operations with respect to any other controller.

Once you have installed the controller, you need to use the internal controller cable(s) to
connect the internal connector(s) of the controller to the system bulkhead. This operation
requires an overall knowledge of the system SCSI configuration.

If you are doing this operation on your own, you can find the proper information in the

Maintenance Guide

. Otherwise, call your Service Representative for assistance.

The same applies to the SCSI controller removal.

Содержание ESCALA E250



































































































































































Отзывы:

Нет отзывов