Buderus Logano GE615, Инструкция по установке и обслуживанию

Страница: 33 / 60

4 Installation
Logano GE615 - We reserve the right to make any changes due to technical modifications. 33
z
Place lower lengthways bars from the side onto the
cross bars with the folded edges facing inwards and
the slotted hole towards the rear, and screw in place
with self-tapping screws.
z
Push rear section insulation onto the flue outlet. The
cut-out for the boiler return must point upwards.
z
Hook the rear section insulation onto the top rear bar
with two tension springs.
z
Close the slit below the flue outlet with tension springs.
Fig 42 Fitting lower lengthways bars and insulation
1 Top rear bar
2 Rear section insulation
3 Tension springs
4 Lower lengthways bar
5 Lower lengthways bar
z
Push rectangular insulation onto the top front bar.
z
Fasten insulation with 3 tension springs.
z
Feed burner cable over the insulation, down the side of
the boiler block.
Fig 43 Fitting the rectangular insulation and burner
cable
1 Insulation
2 Tension springs
3 Burner cable
To prevent damage to the burner cable while
opening the burner door, the burner cable
must always be fed down the hinge side –
whichever side the burner door may be hung
on.