Buderus Logano GE615, Инструкция по установке и обслуживанию

Страница: 34 / 60

4 Installation
Logano GE615 - We reserve the right to make any changes due to technical modifications. 34
V
Depending on which side the door closes, screw the
burner cable strain relief to the left or right hand side of
the lower cross bar (
Æ
Fig. 44 – for right-hand burner
door closure).
z
Push front plinth panel from the front into the lower
lengthways bars and screw them together.
z
Fit the rear plinth panel in the same way.
Fig 44 Fitting the burner cable strain relief and plinth
panels
1 Burner cable strain relief
2 Lower cross bar
3 Front plinth panel
z
Push the lower folded edge of the first side panel
section behind the lower lengthways bar, lift slightly
and hook the top of the section into the slots on the
upper lengthways bar.
Fig 45 Fitting the side panel section
1 First side panel section
2 Upper lengthways bar
3 Lower lengthways bar
z
Push the lower folded edge of the remaining side panel
sections behind the lower lengthways bar, lift slightly
and hook the upper folded edge over the upper
lengthways bar.
Fig 46 Fitting the remaining side panel sections
1 Upper lengthways bar
2 Lower lengthways bar
Please see
Æ
Fig. 47, page 35 for the
arrangement of the side sections and hoods.