Buderus Logano GE615, Инструкция по установке и обслуживанию

Страница: 30 / 60

4 Installation
Logano GE615 - We reserve the right to make any changes due to technical modifications. 30
4.14 Boiler flue connections
This section describes how the boiler flue connections
are made.
4.14.1 Fitting the flue pipe sealing collar
(accessory)
z
Push the flue pipe as far as possible onto the flue gas
header outlet.
z
Place the flue pipe sealing collar around the flue pipe
and flue gas header outlet so that it overlaps at the top.
z
Place jubilee clips over the flue pipe sealing collar. One
of the jubilee clips must press onto the flue gas header
outlet and one onto the flue pipe.
z
Tighten jubilee clips. The flue pipe sealing collar must
fit smoothly and firmly in place.
Fig 37 Fitting the flue pipe sealing collar
1 Flue pipe sealing collar
2 Flue gas temperature sensor
3 Coupling
4 Flue pipe
5 Ubilee clips
6 Flue gas header
4.14.2 Fitting the flue gas temperature sensor
(accessory)
z
Weld the coupling into the flue pipe at a distance of
2 × flue pipe diameters (A) from the flue gas header.
z
Fit the flue gas temperature sensor as described in the
separate installation manual.
For better sealing of the boiler/flue pipe, we
recommend that you use the flue pipe sealing
collar (accessory).
Retighten the jubilee clips if required.