Bticino D45, Техническое руководство

Страница: 59 / 156

57
D
45
VIDEO
DOOR
ENTR
Y SY
STEM
It’s suggested to select the default value, “No forwarding“ for the “Call forward“ option .
Select the node on the left of the main interface and use the default value for the setting .
Select the “SWITCHBOARD” node on the left of the main interface . the interface on the right will be as follows . If the project
includes a Switchboard, press the “
+
” key to add the address of the management centre directed by the D45/IP interface,
which will be defaulted at 1 . If the actual address of the management centre is not set to 1 (it’s recommended that it is 1),
then you can modify and input in the actual address . With several management centres, you can add addresses by pressing
the “
+
” key and input in the correct ones . By using the “  ” key, you can sort an address list for the several management
centres . Sorted at the top is the D45/IP interface that takes priority to call the management centre . If busy, it will be
automatically transferred to the other management centres following the list .