Bticino D45, Техническое руководство

Страница: 58 / 156

SONORA - CARATTERISTICHE GENERALI
56
VIDEO DOOR ENTRY SYSTEM - GENERAL FEATURES
D45
The Autoignition option uses the default value of Switchboard autoignition .
The Entrance panel presence option is used to select whether D45/IP interface connects to the main Backbone/Main EP or
EP . If so, please select Yes, or if it’s only used to connect a Riser and there is no EP in the unit, then select NO . On selecting No,
the Lower address, Higher address, and system address range will become grey, which means that they cannot be set . The
Lower address option is used to input in the lowest address (range 1 to 80 . It must be smaller than the higher address) used by
interface D45/IP to connect the main Backbone to the Main EP or EP .
The Higher address option is used to input in the highest address (range 1 to 80 . It must be higher than the lower address) used
by interface D45/IP to connect the main Backbone to the Main EP or EP . The system address range displays the Backbone/Main
EP or EP address range set for the above two options .
Remarks . With D45/IP interface as part of the network, the Switchboard must use SF4, when the distribution address for
Backbone/Main EP and EP may be different from that used for a floor shunt . When using IT1 and the floor shunt, the EP address
range is 1 to 80, and so is the EP . But when using 323011 and EP jointly use the same address section, namely that main EP+EP
address range is 1 to 80 (All the main EPs and EPs in the system are identified with line address from 1 to 80 that can’t be
repeated) .
example
If the first D45/IP interface 1 connects 2 main EPs and 3 Risers (Riser 1, Riser 2 and Riser 3), then each Riser will be connected to
one EP . If the second D45/IP interface 2 connects 0 main EP and Risers (Riser 4, Riser 5 and Riser 6), then Riser 4 and Riser 6 are
connected to 1 EP and Riser 5 is connected to 2 EPs:
seT The enTrance panl opTion under d45/ip inTerFace
1
Device Locally set address Configure EP deviation
address on323003 Relevant system address Lower address Higher address
The 1 st main EP 1 —— 1
1 5
he 2
nd
main EP 2 —— 2
Riser 1 EP 1 2 1+2=3
Riser 2 EP 1 3 1+3=4
Riser 3 EP 1 4 1+4=5
The enTrance panel opTion under d45/ip inTerFace 2
Device Locally set address
Configure EP deviation
address on 323003
Relevant system address Lower address Higher address
Riser 4 EP 1 5 1+5=6
6 9
The 1 st EP of Riser 5 1
6
1+6=7
The 2
nd
EP of Riser 5 2 2+6=8
Riser 6 EP 1 8 1+8=9
323011 - D45/ip interFace
System accessories functions overview