BTG Mutek PCD-05 Smart, Руководство по эксплуатации

Страница: 8 / 62

8 Operation Manual Mütek
TM
PCD-05, September 2017 © BTG
I. Basic safety instructions
Regarding defects covered by the guarantee, BTG Inst-
ruments AB shall not be liable for any dam-ages excee-
ding the cost price.
The guarantee shall only extend to parts found defec-
tive by BTG Instruments AB. The company is entitled to
decide whether such parts are to be exchanged or
repaired provided the parts have been returned in time
to the nearest authorized retailer of BTG Instruments
AB.
This guarantee does not extend to parts that have been
repaired or modified by the user/ operator without the
prior written approval of an authorized retailer of BTG
Instruments AB.
BTG Instruments AB neither assumes any obligation in
connection with the sale of the instrument nor has it ins-
tructed any other person to undertake such obligation.
Caution
Any changes or modifications not expressly approved
by the party responsible for compliance could void the
user’s authority to operate the equipment.
Disclaimer of liability
BTG Instruments AB has checked the contents of the
printed manual for consistency with the hardware &
software described. However, since deviations cannot
be entirely excluded, BTG Instruments AB does not
accept responsibility for absolute consistency. The cont-
ents of this manual are regularly revised and any cor-
rections that may be necessary will be included in later
issues.
BTG Instruments AB reserves the right to make techni-
cal changes to this document.
1.2 Intended applications of the PCD-05
The Mütek™ PCD-05 shall be used exclusively for the
purposes defined in this operation manual and in the
technical description and shall only be operated in con-
junction with external instruments and components
recommended or approved by BTG Instruments AB.
The Mütek™ PCD-05 Particle Charge Detector shall
solely be used for charge identification of aqueous
samples and for determining their isoelectric point. The
instrument is exclusively intended for indoor use.
Since any other or further-reaching application is consi-
dered illegitimate by BTG Instruments AB, the company
shall not be held liable for damages resulting from such
use.
To comply with the intended applications as defined
above, the user/operator is required
- To follow all the instructions in this operation
manual and
- To perform all inspection and maintenance tasks as
specified
1.3 Non-legitimate use
Illegitimate use (misuse) is defined as follows:
- Any usage other than the allowed usage defined
above or extending beyond the defined usage
- Failure to follow the instructions given in this opera-
tion manual
- Failure to observe the safety directions
- Failure to remedy immediately - i.e. before continu-
ing operation of the instrument - any defect which
might endanger its operational safety and reliability.
- Any unauthorized modification to the instrument
1.4 Qualification of personnel
The instrument may be commissioned and operated
only by qualified personnel. Qualified personnel as
defined in the safety instructions of this operation
manual are persons trained and instructed by BTG Inst-
ruments AB.