BTG Mutek PCD-05 Smart, Руководство по эксплуатации

Страница: 7 / 62

© BTG Operation Manual Mütek
TM
PCD-05, September 2017 7
I. Basic safety instructions
I. Basic safety instructions
1.1 Manufacturer’s liability
Instructions in the operation manual
- All users of the Mütek™ PCD-05 have to observe
this operation manual and to strictly adhere to the
basic safety instructions and safety rules in order to
ensure safe handling and reliable operation of the
Mütek
TM
PCD-05
- This operation manual contains the most important
safety directions to ensure the operational safety of
the Mütek™ PCD-05
- In addition, all applicable accident prevention regu-
lations have to be met for the specific location
where the device is set up
Obligations of the user
The warranty and the service quality guarantee shall
only be valid if the following conditions are met:
- The Mütek™ PCD-05 may only be operated by per-
sons who are proven to have been thoroughly
trained and authorized by BTG Instruments AB
- The user has to observe all instructions by BTG Ins-
truments AB regarding operation and maintenance
of the Mütek™ PCD-05
- Storage and maintenance of the instrument shall be
in accordance with the instructions given by BTG
Instruments AB
- Use of any parts other than the original spare parts
and expendables of BTG Instruments AB will cause
instant termination of warranty, availability and gua-
rantee claims
- Any faults which may affect operational safety of the
system have to be eliminated immediately
- When the system is obviously damaged or parts
inside the system are loose or the system does not
work, the Mütek™ PCD-05 has to be shut down.
Hazards involved in handling the Mütek
TM
PCD-05
Particle Charge Detector
The Mütek™ PCD-05 has been built to reflect state-of-
the-art techniques and to meet recognized safety rules.
However, its operation may entail the risk of accidents
for users or third parties or of damage to the Mütek™
PCD-05 or to other property. The Mütek™ PCD-05 shall
only be used:
- For the intended applications outlined in this opera-
tion manual
- When it is in a condition meeting all safety rules
Users are obliged to immediately eliminate any faults
that may affect operational safety.
Warranty and liability
This instrument was built and tested in accordance with
EU Guidelines 2014/30/EC and 2014/35/EC. It com-
plied with all safety regulations at the time it left the fac-
tory. To maintain this condition and ensure safe
operation, the user must observe the safety instructions
and warning notes contained in this op-eration manual.
It is the responsibility of the owner and user to make
sure that all safety devices and requirements concer-
ning the operating environment of the instrument are
adequately provided for.
Basically, the General Terms and Conditions of BTG
Instruments AB will apply. These will be made available
to the operator of the Mütek™ PCD-05 at the latest on
the day the sales contract is concluded.
BTG Instruments AB shall not be liable for any warranty
or liability claims for personal injury or property damage
that may be consequential to one or several of the follo-
wing causes:
- Non-legitimated use of the Mütek™ PCD-05
- Opening of the instrument on the rear or at the top
plate or at the bottom plate of the system
- Inexpert installation/ assembly, commissioning,
operation and servicing of the Mütek™ PCD-05
- Operation of the Mütek™ PCD-05 although its saf-
ety devices and protection facilities are defective,
inexpertly mounted or malfunctioning
- Failure of the user/ operator to adhere to the inst-
ructions given in this operation manual regarding
transport, storage, assembly, commissioning, ope-
ration and maintenance of the Mütek™ PCD-05
- Modifications made to the Mütek™ PCD-05 without
prior approval of BTG Instruments AB
- Inadequate routine checks of parts/assemblies of
the Mütek™ PCD-05 which are subject to wear
- Inexpert repairs
- Catastrophes caused by the effects of foreign
objects or by Acts of God
Trouble-free and safe operation of the instrument is only
possible subject to correct transport, storage, installa-
tion and assembly and to careful handling and main-
tenance.
If the Mütek™ PCD-05 is sent in for repair, the whole
system has to be returned, including measuring cell and
displacement piston.
The guarantee for the Mütek™ PCD-05 is one year star-
ting as of the date of delivery.