15
2
Note
•
Avoid using craft paper or fabric covered with decorative layer (that can easily separate), such as lamé or foil.
The separate layer may stick to the machine’s scanning device or feed rollers during operation, resulting in
damage to the machine. It may also damage the cutting blade. When using such material, be sure to clean the
scanner glass inside the machine after every use (page 91).
•
Tape material that can easily peel off, such as foam sheets, to secure it in place.
•
Be careful since tape with an extremely high adhesive strength may damage the mat.
•
Do not affix masking tape, etc., over the scanning marks. Otherwise, the mat may not be correctly recognized or
images may not be correctly scanned.
a
Scanning marks
•
Do not affix tape on both long edges of the cutting mat as it may attach to the feed rollers during operation.
•
Do not attach any material or tape that will go beyond the adhesive area of the mat as the auto blade holder
may not recognize the material thickness and may not accurately cut the material.
a
a
Содержание 893-Z05
Страница 6: ...3 PRODUCT SPECIFICATIONS 105 INDEX 106 ...
