Brother 893-Z05, Руководство по эксплуатации

Страница: 14 / 110

11
1
Half Cut
Select whether or not to make half-cuts. For details,
see “Half Cut (Kiss Cut) Settings” on page 28.
Cut Pressure (Half Cut)
Specify the cutting pressure for half-cuts.
Blade Adjustment Area
Select from 1/4, 1/2, 3/4 or whole cutting area to be
used for blade adjustment. Before cutting out a
pattern, this machine performs an automatic blade
adjustment, which adjusts the direction of the blade
outside of the adhesive area of the mat.
• With each press of the left or right arrow key,
the size of the blade adjustment area changes
by 1/4.
a 1/4
b 2/4
c
3/4
d
Entire area
Draw Speed
Adjust the drawing speed.
Draw Pressure
Adjust the drawing pressure. Adjustments to the
drawing pressure will affect the finished product. Use
the same material that the pattern will be drawn on to
make the adjustments in advance. If the pressure is
too high, the pen tip may be damaged. Adjust the
pressure appropriately.
■
Group 3
Seam Allowance
Specify the seam allowance. This is applied when
drawing on fabric, then cutting it, for example, when
making quilt pieces. For details, see “Cutting Around
Drawings” on page 63.
Memo
• When multiple patterns are cut at the same
time, the setting specified in this screen is
applied to all patterns.
• If cutting line data saved with a different seam
allowance is imported and used, the setting
specified in this screen will have priority over
the saved setting.
Fill
Select the design that will be used to fill patterns. For
details, see “Using Drawing Functions to Fill Patterns/
Make Outlines Thicker” on page 67.
Additional Line
With [Number of Additional Line], specify the number
of lines to be added. With [Additional Line Spacing],
specify the spacing of the lines to be added.
Memo
• For details for Fill and Additional Line setting,
refer to “Using Drawing Functions to Fill
Patterns/Make Outlines Thicker” on page 67.
■
Group 4
Auto Shutdown
Specify the length of time for the auto shutdown
function. The setting can be specified in 1-hour
increments. For details, see “Auto Shutdown” on
page 12.
Buzzer Sound
Select whether or not an operation sound is
produced, for example, when a key is touched.
Opening Screen
Select whether the opening slide show is displayed
after the machine is turned on. If the slide show is
displayed, touch the screen to display the home
screen.
Scanning/Cutting Position Adjustment
The scanning/cutting position can be adjusted. To
adjust the position, touch this button to display the
settings screen. For details, see “Adjusting the
Scanning/Cutting Position” on page 92.
1
2
3
4