Brother 893-Z05 Скачать руководство пользователя страница 29

Страница: 29 / 110

■

Loading the Mat

Attach the material that will be cut to the mat.

• For details on attaching material to the mat, see

“Attaching the material to the mat” on page 16.

While holding the mat level and lightly

inserting it into the feed slot, press

in the

operation panel.

Insert the tip of the mat so that it aligns with the guides
on the left and right sides of the feed slot and is tucked
under the feed rollers. Insert the end of the mat marked
with an arrow into the machine.

Guides

Feed rollers



The mat is fed in to complete the preparations for
cutting.

Note

•

Do not forcefully pull the mat while it is being
fed in. Otherwise, damage, for example, to the
feed rollers, may result.

■

Cutting

Select “Cut” in the test screen.

Note

• To make half cuts (kiss cuts), turn on half cut

(kiss cut) in the settings screen. For details on
specifying the settings, see “Half Cut (Kiss Cut)
Settings” on page 28.

Touch the "Start" key to start cutting.



When cutting is finished, the message “Finished
cutting.” appears on the display. Touch the “OK”
key to return to the test screen.

Содержание 893-Z05















































































































Результаты поиска

Содержание 893-Z05

Отзывы:

Похожие инструкции для 893-Z05

Бренды по названию

Популярные бренды

Brother 893-Z05, Руководство по эксплуатации

Результаты поиска

Содержание 893-Z05

Отзывы:

Похожие инструкции для 893-Z05

Бренды по названию

Популярные бренды