Brother 893-Z05 Скачать руководство пользователя страница 57

Страница: 57 / 110



When saving is finished, the following message
appears. For details on checking data saved in
CanvasWorkspace, refer to the Help for
CanvasWorkspace.

Touch the “OK” key to finish saving the data.

Retrieve Data

Touch the “Retrieve Data” key in the home
screen to display the retrieve source selection
screen.

To use the data from a USB flash drive, insert
the USB flash drive into the USB port (for a
USB flash drive) on this machine.

Touch where you saved the pattern to be
retrieved, and then select the pattern.

Retrieve from machine's memory key

Retrieve from USB flash drive key

Retrieve from CanvasWorkspace key (via a
wireless network connection)

Retrieve from CanvasWorkspace key (using
a USB cable)

Retrieve from the machine’s memory.



Touch the pattern to be retrieved and display.

Retrieve from a USB flash drive.

• If there are folders on the USB flash drive, touch

a folder to display the list of patterns that it
contains.

• If there are many folders or patterns, touch the

arrows keys in the screen to scroll up or down.

Memo

• It may take some time for the USB flash drive to

be detected. Wait 5 to 6 seconds after inserting
the USB flash drive before pressing a key. (The
length of time differs depending on the USB
flash drive.)

• When using a USB flash drive with an access

indicator, wait until the indicator stops flashing.

• If an error is indicated, touch

again.



Touch the pattern to be retrieved and display.

Memo

• When retrieving pattern data from the

machine’s memory or a USB flash drive, the
size of the thumbnail previews can be changed.

Touch

to display the settings screen, and

then touch

to change the size.

Содержание 893-Z05















































































































Результаты поиска

Содержание 893-Z05

Отзывы:

Похожие инструкции для 893-Z05

Бренды по названию

Популярные бренды

Brother 893-Z05, Руководство по эксплуатации

Результаты поиска

Содержание 893-Z05

Отзывы:

Похожие инструкции для 893-Z05

Бренды по названию

Популярные бренды