Brother 882-W70 Скачать руководство пользователя страница 109

Страница: 109 / 212

BEFORE EMBROIDERING

107

asic
E

der
y

Plug the connector of the embroidery foot “W+” with
LED pointer into the jack on the back left side of your
machine.

Press

to unlock all keys and buttons.



All keys and operation buttons are unlocked, and the
previous screen is displayed.

About the Embroidery Unit

■

Attaching the Embroidery Unit

Turn the main power to OFF, and remove the flat bed
attachment.

Insert the embroidery unit connection into the
machine connection port. Push lightly on the
connection port cover until the unit clicks into place.

Embroidery unit connection

Machine connection port

Carriage

Turn the main power to ON.



The following message will appear.

Press .



The carriage will move to the initialization position.

CAUTION

• Before attaching or removing the embroidery

unit, be sure to turn off the machine.
Otherwise, injuries may occur if one of the
operation buttons is accidentally pressed.

• Do not move the machine with the embroidery

unit attached. The embroidery unit could fall
off and cause injury.

• Keep your hands and foreign objects away

from the embroidery carriage and frame when
the machine is embroidering. Otherwise,
injuries or damage may result.

• To avoid distorting your embroidery design, do

not touch the embroidery carriage and frame
when the machine is embroidering.

• Do not push on the carriage when installing

the embroidery unit onto the machine. Moving
the carriage may damage the embroidery unit.

• Allow sufficient space around the embroidery

unit. Otherwise, the embroidery unit could fall
off foreign object, and may cause injury.

• Do not touch the embroidery carriage until the

initialization finishes.

• Be sure to turn off the power before attaching

or removing the embroidery unit. Otherwise,
the machine may be damaged.

• Do not touch the inner connector of the

embroidery unit. The pins on the embroidery
unit connection may be damaged.

• Do not apply strong force to the embroidery

unit carriage or pick up the unit by the
carriage. Otherwise, the embroidery unit may
be damaged.

• Store the embroidery unit in a safe place to

prevent damage to the unit.

• Do not carry the embroidery unit by holding

the carriage or release lever compartment.

Note

• You can also sew utility/decorative stitches with

the embroidery unit attached. Touch

and

. The feed dog will automatically raise for

utility and decorative stitching.

Note

• Be sure there is no gap between the embroidery

unit and the machine. If there is a gap, the
embroidery patterns will not embroider with the
correct registration.

Содержание 882-W70





















































































































































































































Результаты поиска

Содержание 882-W70

Отзывы:

Похожие инструкции для 882-W70

Бренды по названию

Популярные бренды

Brother 882-W70, Руководство по эксплуатации

Результаты поиска

Содержание 882-W70

Отзывы:

Похожие инструкции для 882-W70

Бренды по названию

Популярные бренды