Brother 882-W70 Скачать руководство пользователя страница 60

Страница: 60 / 212

SEWING

When the needle has stopped moving, raise the presser
foot and remove the fabric.

■

Using the Foot Controller

You can also use the foot controller to start and stop
sewing.

Turn off the machine.

Insert the foot controller plug into the foot controller
jack on the machine.

Turn on the machine.

Slowly depress the foot controller to start sewing.

Release the foot controller to stop the machine.

Combining Stitch Patterns

Stitch patterns from the following categories can be
combined.

Example:

Press .

Select the following stitch pattern (8-35).

Press

so that it displays

Press .



The display returns to the stitch selection screen.

Note

• When cutting thread, such as metallic thread or

other decorative threads, use the thread cutter on
the side of the machine. Cut transparent nylon
thread in the same way.

Memo

• When the foot controller is connected, you cannot

use the “Start/Stop” button.

• The foot controller cannot be used when

embroidering.

Foot controller jack

Memo

• The speed that is set using the sewing speed

controller will be the foot controller’s maximum
sewing speed.

Содержание 882-W70





















































































































































































































Результаты поиска

Содержание 882-W70

Отзывы:

Brother 882-W70, Руководство по эксплуатации, Страница: 60 / 212

Результаты поиска

Содержание 882-W70

Отзывы: