Brother 882-W70 Скачать руководство пользователя страница 186

Страница: 186 / 212

TROUBLESHOOTING

184

Bobbin thread is incorrectly wound.

Upper thread breaks.

Machine is not threaded correctly (used the
wrong spool cap, spool cap is loose, the thread
did not catch the needle bar threader, etc.)

Knotted or tangled thread is being used.

—

The selected needle is not appropriate for the
thread being used.

Upper thread tension is too tight.

62, 143

Thread is twisted.

—

Needle is turned, bent or the point is dull.

Needle is installed incorrectly.

There are scratches around the opening of the
needle plate.

There is a notch on the left side of the opening
in the needle plate. This is not a scratch.

There are scratches around the opening in the
presser foot.

There are scratches on the bobbin case.

Using improper needle or thread for the selected
fabric.

A bobbin designed specifically for this machine is
not being used.

Thread is weak, dry rotted, or of poor quality.

—

The thread is tangled on the wrong side of the fabric.

Upper threading is incorrect.

Using improper needle or thread for the selected
fabric.

The upper thread is too tight.

The bobbin thread is incorrectly installed.

Bobbin thread breaks.

Bobbin is set incorrectly.

Bobbin thread is incorrectly wound.

There are scratches on the bobbin or it doesn’t
rotate properly.

Thread is twisted.

—

Symptom, Cause/solution

Reference

Notch

A bobbin designed specifically for this machine is
not being used.

Fabric puckers.

There is a mistake in the upper or bobbin
threading.

40, 42

Spool cap is set incorrectly.

Using improper needle or thread for the selected
fabric.

Needle is turned, bent or the point is dull.

Stitches are too long when sewing thin fabrics.

Thread tension is set incorrectly.

62, 143

Wrong presser foot.

194

Fabric and stabilizer are not taut in the
embroidery frame.

128

Incorrect or insufficient stabilizer is being used.

127

The stitch is not sewn correctly.

The presser foot that is used is not appropriate
for the type of stitch that you wish to sew.

194

The thread tension is incorrect.

The thread is tangled, for example, in the bobbin
case.

176

Skipped stitches

Machine is threaded incorrectly.

Using improper needle or thread for the selected
fabric.

Needle is turned, bent or the point is dull.

Needle is installed incorrectly.

Needle is defective.

Dust or lint has collected under the needle plate.

176

Thin or stretch fabrics are being used.

No stitching

Needle is turned, bent or the point is dull.

Bobbin is set incorrectly.

Upper threading is incorrect.

High-pitched sound while sewing

Needle is turned, bent or the point is dull.

Dust or lint is caught in the feed dogs.

176

Pieces of thread are caught in the race.

176

Symptom, Cause/solution

Reference

Содержание 882-W70





















































































































































































































Результаты поиска

Содержание 882-W70

Отзывы:

Brother 882-W70, Руководство по эксплуатации, Страница: 186 / 212

Результаты поиска

Содержание 882-W70

Отзывы: