Brother 882-W70, Руководство по эксплуатации

Страница: 87 / 212

UTILITY STITCHES
V
ar
ious
St
itc
he
s
85
3
Shell Tuck Stitches
The gathers that look like shells are called “shell tucks”.
They are used to decorate trims, the front of blouses or
cuffs made of thin fabrics.
a
Draw equally spaced lines along the bias, and then fold
the fabric along the lines.
b
Select , and then increase the thread tension.
c
Attach zigzag foot “J”.
d
Sew while making sure that the needle drops slightly
off the edge of the fabric.
One fold at a time, continue folding the fabric along the
line, then sewing it.
e
After sewing is finished, remove the fabric. Unfold the
fabric, and then iron the tucks down to one side.
Scallop Stitches
The wave-shaped repeated stitch pattern that looks like
shells is called “scalloping”. It is used on the collars of
blouses and to decorate the edges of projects.
a
Select .
b
Attach monogramming foot “N”.
c
Stitch along the edge of the fabric, making sure not to
sew directly on the edge of the fabric.
d
Trim along the stitches.
• Be careful not to cut the stitches.
Smocking Stitches
The decorative stitch created by stitching or
embroidering over gathers is called “smocking”. It is
used to decorate the front of blouses or cuffs.
The smocking stitch adds texture and elasticity to fabric.
a
Select the straight stitch, and then adjust the stitch
length to 4.0 mm (3/16 inch) and loosen the thread
tension.
b
Attach zigzag foot “J”.
c
Sew parallel stitching at intervals of 1 cm (3/8 inch)
and pull the bobbin threads to create gathers.
Smooth the gathers by ironing them.
d
Select a stitch.
Memo
• For details on stitch patterns, refer to “STITCH
SETTING CHART” on page 194.
1
Needle drop
point
Memo
• For details on stitch patterns, refer to “STITCH
SETTING CHART” on page 194.
a
Memo
• For details on stitch patterns, refer to “STITCH
SETTING CHART” on page 194.