Brother 882-W70 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 212

Brother 882-W70 Скачать руководство пользователя страница 16

NAMES OF MACHINE PARTS

14

■

Using the Flat Bed Attachment

Pull the top of the flat bed attachment to open the
accessory compartment.

1

Presser foot storage tray

2

Presser foot storage space of the flat bed attachment

■

Using the Accessory Case (Included with Some
Models)



Opening the accessory case

Fully slide the bar on each side of the accessory case to
the unlocked position, and then lift off the lid to open the
case.
The case can only be opened or locked correctly if both
bars are slid in the same direction.

1

Bars



Closing the accessory case

a

Fully slide the bar on each side of the accessory case
lid to the unlocked position.

b

Place the lid on top of the case so that the notches in
the lid align with the tabs on the case, and then slide
the bar on each side back to the locked position.

■

Storing Bobbin Clips

Bobbin clips can be stored inside of the accessory case
cover.

a

b

a

Memo

• Placing bobbin clips on bobbins helps prevent the

thread from unwinding from the bobbin. In
addition, snapping bobbin clips together allows the
bobbins to be conveniently stored and prevents
them from rolling around if they are dropped.

«
...
14
15
16
17
18
...
»

Содержание 882-W70





















































































































































































































Отзывы:

Нет отзывов