25
Balancer Cube
Operator’s manual
3. Press [F+P3]
. The writing
SER SER
will be displayed (this means that we have
entered the SERVICE mode)
.
4. Press [P3]
. The writing
CAL CAR
(calibration for auto-vehicle and off-road vehicle wheels)
will be displayed;
5. To select the MOTO (motorbike wheel) calibration type, press [P4]
or [P5]
. When
the MOTO calibration type is selected, the machine automatically loads the geometric data of the
motorbike flange and automatically sets the MOTO Wheel Type and the ALU1 programme.
to confirm. The writing
CAL 0
will be displayed;
6.
Press [P3]
7.
Rotate the adaptor
vertical to 12o clock position, press [P3]
the machine will display the
writing CAL 1
8.
Spin by manually
rotate
the wheel in
cou
nter clockwise direction until you hear a beep.
At the end of
the
measurement
, the machine will display the writi
ng
50 CAL
.
9.
Apply the calibration weight
on the inner side of the adaptor with the weight part to the adaptor.
Fig.4.2.1
10.
Spin by manually
rotate
the wheel in
cou
nter clockwise direction until you hear a beep.At the end of
the measurement, the machine will display the writing CAL
50
.
11.
Apply the calibration weight on the outerside of the adaptor with the weight part away from the
adaptor.
Fig.4.2.2
12.
Spin by rotating manually the wheel in
cou
nter clockwise direction until you hear a beep.At the end
of the measurement, the machine will return to its start
up
menu.
+
Fig.4.2.1
Содержание OSPREY BP63
Страница 1: ...BP63 OSPREY...