BRIGHT OSPREY BP63, Руководство оператора

Страница: 29 / 44

Balancer Cube Operator's manual 28
GB
Fig. F5.3 - “Bring the valve to the 12 o’clock position” message
3. Bring the valve to the 12 o’clock position, mark the valve position on the t i re (see figure F5.4) .
Fig. F5.4 - Marking of the valve position on the tire
4. Press [P4] . The message seen in figure F5.5 will be displayed;
Fig. F5.5 “Run the launch” message
5. Remove the wheel from the shaft, remove the t i re bead, rotate it so that the mark is at 180° respect to
the valve (see figure F5.6);
Fig. F 5 .6 - Marking the ti re at 180° respect to the valve
6. Remount the wheel on the shaft, erase the mark and run a launch;
7. At the end of the cycle, the message seen in figure F5.3 will be displayed. Two options are available:
a) Bring the valve to the 12 o’clock position and press [P4] to continue. In this case, the
message seen in figure F1.7 will be displayed.