BRIGHT OSPREY BP63, Руководство оператора

Страница: 43 / 44

Balancer Cube Operator's manual 4 2
GB
12. MAINTENANCE
WARNING
The producer declines all responsibility for claims deriving from the use of non original spare parts
or accessories.
WARNING
Unplug the machine from the power supply and make sure that all moving parts have been locked
before performing any adjustment or maintenance operation.
Do not remove or modify any part of the machine (except for service interventions).
CAUTION
Keep the work area clean.
Never use compressed air and/or jets of water to remove dirt or residues from the machine.
Take all possible measures to prevent dust from building up or raising during cleaning operations.
Keep the wheel balancer shaft, the securing ring nut, the centring cones and flange clean. These components
can be cleaned using a brush previously dripped in environmentally friendly solvents.
Handle cones and flanges carefully so as to avoid accidental dropping and subsequent damage that would
affect centring accuracy.
After use, store cones and flanges in a place where they are suitably protected from dust and dirt.
If necessary, use ethyl alcohol to clean the display panel.
Perform the calibration procedure at least once every six months.
13. INFORMATION REGARDING MACHINE DEMOLITION
If the machine is to be scrapped, remove all electrical, electronic, plastic and metal parts
and dispose of them separately in accordance with current provisions as prescribed by law.
14. ENVIRONMENTAL INFORMATION
The following disposal procedure shall be exclusively applied to the machines having the crossed-out bin
symbol on their data plate .
This product may contain substances that can be hazardous to the environment and to human health if it
is not disposed of properly.
The following information is therefore provided to prevent the release of these substances and to improve
the use of natural resources.
Electrical and electronic equipment must never be disposed of in the usual municipal waste but must be
separately collected for their proper treatment.
The crossed-out bin symbol, placed on the product and on this page, reminds the user that the product
must be disposed of properly at the end of its life.
In this way it is possible to prevent that a non specific treatment of the substances contained in these
products, or their improper use, or improper use of their parts may be hazardous to the environment or
to human health. Furthermore, this helps to recover, recycle and reuse many of the materials contained
in these products.
Electrical and electronic manufacturers and distributors set up proper collection and treatment systems