BRIGHT OSPREY BP63, Руководство оператора

Страница: 8 / 44

7 Balancer Cube Operator’s manual
3.1 Type of Program (Program Type)
The machine allows the choice between eight different Types of Balancing Program s as listed in table
T3.1
Table T3.1 - Program Types available
Program
type
Wheel
material
Weight position along
the rim section
Automatic
acquisition
(1)
Notes
STD Steel Default 1 sensor Start-up default
ALU1
Aluminium Default 1 sensor
Forcibly set when the
motorbike program
type is selected
ALU2 Aluminium Default 1 sensor
ALU3 Aluminium Default 1 sensor
ALU4 Aluminium Default 1 sensor
ALU5 Aluminium Default 1 sensor
ALS1
Aluminium
Default for the internal
weight, provided by the
user for the external
weight
1 sensor
ALS2 Aluminium Provided by the user 1 sensor
. Program s are selected in the NORMAL mode by pressing the buttons [P4] or [P5]
At the first selection of one of these two buttons, the currently selected Program Type will appear on
the display; if within about 1.5 seconds, one of these two buttons is not pressed again, the display will
return to the previous state without editing the running Program Type.
Depending on the running Program Type, the following LEDs are lit on the control panel:
• Program type LED See figure F1, detail [7].
• Weight Imbalance Position LED. See figure F1, detail
[13].
Note:
The selection of the STD Program Type removes the selection of the Static imbalance display.
The selected Program Type also influences the automatic acquisition of wheel dimensions (feature avai-
lable only on some models of the machine) as shown in the Automatic acquisition column in table T3.1.
The acquisition that features only 1 sensor uses the Distance/Diameter sensor.