13
Balancer Cube opera
tor’s manual
3.3.2 Manual entering of the wheel dimensions for ALS1 and ALS2 Program
Types
To introduce the wheel size manually, proceed as follows:
1.
Assemble the wheel on the shaft;
2.
If the selected program type is ALS1, extract the distance sensor and place it on the wheel as shown in
Figure F3.4, otherwise proceed with step 4.
3.
If the selected program type is ALS2, extract the distance sensor and place it on the plane chosen
for the internal weight as shown in Figure F3.4;
4.
Read the value of the internal distance of the plane on the graduated scale. The distance value is
always expressed in millimetres;
5. Press [P1]
once to view the
di1
parameter (distance of the internal plane), and press [P4]
or [P5]
within 1.5 seconds to enter the read value. If either one of these two
buttons is not pressed, in this time frame, the machine will return to the previous screen. In this case,
you can press [P1]
again, twice in rapid sequence, to enter or edit data;
6. Extract the distance sensor and place it on the plane chosen for the external weight as shown in Figure
F3.5;
7. Read the distance value on the graduated scale. The distance value is always expressed in millimetres;
8. Press [P1]
twice in rapid sequence until
di2
(distance of the external surface) is displayed
and, within 1.5 seconds, press [P4]
or [P5]
to enter the read value. If either one
of these two buttons is not pressed, in this time frame, the machine will return to the previous screen.
In this case, you can press [P1]
again, twice in rapid sequence, to enter or edit data;
9. Press the button [P3]
once to view
da1
(diameter of the internal plane), and buttons [P4]
or [P5]
within 1.5 seconds to enter the value resulting from one of the two me-
thods described in the note below.
If either one of these two buttons is not pressed, in this time frame, the machine will return to the
previous screen. In this case, you can press [P3]
again to enter or edit data;
10. Press the button [P3]
twice in rapid sequence to view
da2
(diameter of the external
plane), and buttons [P4]
or [P5]
within 1.5 seconds to enter the value resulting
Содержание OSPREY BP63
Страница 1: ...BP63 OSPREY...