Balancer Cube
Operator's manual
20
GB
2. Apply the weight shown on the left display (internal weight) on the Distance/Diameter sensor as seen
in figure F3.12;
a
b
c
adhesive
surface
Fig. F3.12 Application of adhesive weights on the Distance/Diameter
3.
Manually rotate the wheel until all the internal imbalance position LEDs light up (see fig. F1, detail [4]).
Stop
the wheel in this position by using the footbrake or electromagnetic brake (if present);
4.
Slowly extract the sensor until you hear the continuous beep indicating that the internal balancing
plane has been reached. The left display helps the operator in this operation by indicating the direction
in which the sensor must be moved. See figures F3.13, F3.14 and F3.15;
Fig. F3.13 - Balancing planes search: the left display indicates t
he need to
extract the sensor
(moving it to the right) in order to find the exact position of the internal balancing plane
Fig. F3.14 - Balancing planes search: the left display indicates t
he need to
re-introduce the sensor
(moving it to the left) in order to find the exact position of the internal balancing plane
Fig. F3.15 - Balancing planes search: the left display indicates that the sensor is exactly on the
internal balancing plane
Содержание OSPREY BP63
Страница 1: ...BP63 OSPREY...